Connecting to a remote ESX / ESXi / vCenter Server from VMware Workstation

Purpose

VMware Workstation 8 allows you to create a remote connection to an ESX/ESXi/vCenter Server to manage virtual machines. When connected to a remote machine, you can:

  • Create new Datacenters on a vCenter Server
  • Check the power status of virtual machines
  • Power on and off existing virtual machines
  • Create new virtual machines
  • Modify virtual machine settings (hard disk, CD-ROM, etc)
  • Upload virtual machines to the server using the OVF tool

Resolution

To connect to a remote server:

  1. Go to File > Connect to server.
  2. Enter the server hostname or IP address and username and password. If the server runs on a non-standard port, follow the hostname / address with a colon and then the port number.

    For example, 192.168.1.2:2020 

  3. When prompted you can choose to store the password, to never store the password, or to decide later.

Based on VMware KB 2005822


  • 2 Benutzer fanden dies hilfreich
War diese Antwort hilfreich?

Verwandte Artikel

Hardware and firmware requirements for 64-bit guest operating systems

PurposeThis article explains the host machine hardware and firmware requirements for installing...

Logging in to the vCenter Server 5.0 Web Client fails with the error: unable to connect to vCenter Inventory Service

DetailsAfter upgrading from vCenter Server 4.1 to 5.0, you experience these symptoms:Cannot log...

Multiple network entries in vCenter Server 5.0.x after migrating virtual machines from a virtual switch to a virtual distributed switch

SymptomsAfter migrating virtual machines from a virtual switch to a virtual Distributed...

Minimum requirements for the VMware vCenter Server 5.x Appliance

PurposeIf you are using the VMware vCenter Server Appliance, beginning with vSphere 5.0 you can...