ESX350-201002411-BG may cause problems booting on Fujitsu / Fujitsu-Siemens RX600-S2 and RX600-S3

Details

  • ESX has a problem booting up after installing patch ESX350-201002411-BG on Fujitsu / Fujitsu-Siemens RX600-S2 and RX600-S3 with installed DVD-ROM drive.  
  • The boot process stops at: 

    Loading VMKernel ata_piix.o

Solution

To resolve this issue, install ESX350-201012405-BG

Based on VMware KB 1023656
  • 0 Kunder som kunne bruge dette svar
Hjalp dette svar dig?

Relaterede artikler

Hardware and firmware requirements for 64-bit guest operating systems

PurposeThis article explains the host machine hardware and firmware requirements for installing...

Logging in to the vCenter Server 5.0 Web Client fails with the error: unable to connect to vCenter Inventory Service

DetailsAfter upgrading from vCenter Server 4.1 to 5.0, you experience these symptoms:Cannot log...

Multiple network entries in vCenter Server 5.0.x after migrating virtual machines from a virtual switch to a virtual distributed switch

SymptomsAfter migrating virtual machines from a virtual switch to a virtual Distributed...

Minimum requirements for the VMware vCenter Server 5.x Appliance

PurposeIf you are using the VMware vCenter Server Appliance, beginning with vSphere 5.0 you can...