IBM Athena x3850 M2 or x3950 M2 Servers Stop Responding When Booted into Debug Mode

Details

ESX Server 3.5 Update 1 might not work if the IBM Athena x3850 M2 or x3950 M2 servers are booted into debug mode. This issue occurs due to a BIOS bug on IBM Athena x3850 M2 and x3950 M2 servers.

Solution

Currently, there is no workaround. This issue will be fixed in a future update release.
 
IBM Athena x3850 M2 or x3950 M2 servers might stop responding when booting into debug mode with ASSERTvmkernel/hardware/pci.c:1088.

Based on VMware KB 1004843
  • 0 brukere syntes dette svaret var til hjelp
Var dette svaret til hjelp?

Relaterte artikler

Hardware and firmware requirements for 64-bit guest operating systems

PurposeThis article explains the host machine hardware and firmware requirements for installing...

Logging in to the vCenter Server 5.0 Web Client fails with the error: unable to connect to vCenter Inventory Service

DetailsAfter upgrading from vCenter Server 4.1 to 5.0, you experience these symptoms:Cannot log...

Multiple network entries in vCenter Server 5.0.x after migrating virtual machines from a virtual switch to a virtual distributed switch

SymptomsAfter migrating virtual machines from a virtual switch to a virtual Distributed...

Minimum requirements for the VMware vCenter Server 5.x Appliance

PurposeIf you are using the VMware vCenter Server Appliance, beginning with vSphere 5.0 you can...