ESXi 5.0 file system GUIDs

Details

File system GUIDs are necessary when using partedUtil on ESXi 5.0 hosts.

Solution

ESXi 5.0 has the following file system GUIDs:
Partition type
GUID
VMFS Datastore
2AE031AA-0F40-DB11-9590000C2911D1B8
VMKCore Diagnostic
8053279D-AD40-DB11-BF97000C2911D1B8
VMware Reserved
CDEF9891-C031-DB11-8F78000C2911D1B8
 
 
The GUIDs in this table are written assuming a little-endian byte order. The GUID for VMFS is written as 0xaa31e02a, 0x400f, 0x11db, 0x95, 0x90, 0x00, 0x0c, 0x29, 0x11, 0xd1, 0xb8, which corresponds to the 16 byte sequence 2a e0 31 aa 0f 40 db 11 95 90 00 0c 29 11 d1 b8 - only the first three blocks are byte swapped.

Based on VMware KB  2004162
  • 0 Uživatelům pomohlo
Byla tato odpověď nápomocná?

Související články

Hardware and firmware requirements for 64-bit guest operating systems

PurposeThis article explains the host machine hardware and firmware requirements for installing...

Logging in to the vCenter Server 5.0 Web Client fails with the error: unable to connect to vCenter Inventory Service

DetailsAfter upgrading from vCenter Server 4.1 to 5.0, you experience these symptoms:Cannot log...

Multiple network entries in vCenter Server 5.0.x after migrating virtual machines from a virtual switch to a virtual distributed switch

SymptomsAfter migrating virtual machines from a virtual switch to a virtual Distributed...

Minimum requirements for the VMware vCenter Server 5.x Appliance

PurposeIf you are using the VMware vCenter Server Appliance, beginning with vSphere 5.0 you can...