Changing the CIM host configuration variables in ESX/ESXi 4.0

Details

You can use the vSphere Client to enable or disable the Common Information Model (CIM) service and CIM providers. You can also set the CIM watchdog polling interval by configuring Advanced Settings variables for the host. In ESX/ESXi 3.5, you can find these variables under the Misc option in the Advanced Settings dialog. In ESX/ESXi 4.0, you can find these variables under theUserVars option.

Solution

To change the CIM configuration for an ESX/ESXi 4.0 host:
  1. Using the vSphere Client, log in to the host or vCenter Server, and select the host in the inventory.
  2. Click the Configuration tab.
  3. Select Advanced Settings under Software.
  4. Select UserVars.
  5. Changes the values of the variables, as required.
  6. Click OK.
Based on VMware KB 1010745
  • 0 utilizatori au considerat informația utilă
Răspunsul a fost util?

Articole similare

Hardware and firmware requirements for 64-bit guest operating systems

PurposeThis article explains the host machine hardware and firmware requirements for installing...

Logging in to the vCenter Server 5.0 Web Client fails with the error: unable to connect to vCenter Inventory Service

DetailsAfter upgrading from vCenter Server 4.1 to 5.0, you experience these symptoms:Cannot log...

Multiple network entries in vCenter Server 5.0.x after migrating virtual machines from a virtual switch to a virtual distributed switch

SymptomsAfter migrating virtual machines from a virtual switch to a virtual Distributed...

Minimum requirements for the VMware vCenter Server 5.x Appliance

PurposeIf you are using the VMware vCenter Server Appliance, beginning with vSphere 5.0 you can...