Panic error on ESX Server host with Neterion Network Adapter when booting into Service Console

Details

If you are booting into the service console for troubleshooting, a panic error might occur on ESX Server hosts with Neterion network adapters if you perform multiple boots under these circumstances:
  • You have modified the MTU for the network adapter several times. Modifying the MTU might also make the system unresponsive.
  • After modifying the network adapter's MTU, you attempt to unload the network adapter driver.

Solution

Avoid changing the MTU while using the service console to avoid the panic error. This issue is resolved in ESX Server 3.5.

Based on VMware KB 1003094
  • 0 brukere syntes dette svaret var til hjelp
Var dette svaret til hjelp?

Relaterte artikler

Hardware and firmware requirements for 64-bit guest operating systems

PurposeThis article explains the host machine hardware and firmware requirements for installing...

Logging in to the vCenter Server 5.0 Web Client fails with the error: unable to connect to vCenter Inventory Service

DetailsAfter upgrading from vCenter Server 4.1 to 5.0, you experience these symptoms:Cannot log...

Multiple network entries in vCenter Server 5.0.x after migrating virtual machines from a virtual switch to a virtual distributed switch

SymptomsAfter migrating virtual machines from a virtual switch to a virtual Distributed...

Minimum requirements for the VMware vCenter Server 5.x Appliance

PurposeIf you are using the VMware vCenter Server Appliance, beginning with vSphere 5.0 you can...