Uninstalling PowerPath VE on ESXi 5.0

Purpose

This article provides steps to uninstall PowerPath VE on ESXi 5.0.
 
You may want to use this procedure when:
  • You are unable to remove the PowerPath claimrule using the esxcli storage core claimrule removecommand.
  • Even after a reboot, running the esxcli storage core claimrule list command shows PowerPath.

Resolution

To uninstall PowerPath VE on ESXi 5.0:

  1. Log in to the ESXi host using SSH.
  2. Run this command:

    #esxcli software vib remove -n powerpath.cim.esx -n powerpath.lib.esx -n powerpath.plugin.esx

  3. Reboot host.
  4. Run this command and confirm that PowerPath no longer exists:

    #esxcli storage core claimrule list



Based on VMware KB 2016721
  • 1 A felhasználók hasznosnak találták ezt
Hasznosnak találta ezt a választ?

Kapcsolódó cikkek

Hardware and firmware requirements for 64-bit guest operating systems

PurposeThis article explains the host machine hardware and firmware requirements for installing...

Logging in to the vCenter Server 5.0 Web Client fails with the error: unable to connect to vCenter Inventory Service

DetailsAfter upgrading from vCenter Server 4.1 to 5.0, you experience these symptoms:Cannot log...

Multiple network entries in vCenter Server 5.0.x after migrating virtual machines from a virtual switch to a virtual distributed switch

SymptomsAfter migrating virtual machines from a virtual switch to a virtual Distributed...

Minimum requirements for the VMware vCenter Server 5.x Appliance

PurposeIf you are using the VMware vCenter Server Appliance, beginning with vSphere 5.0 you can...